CTF FOAM FOR AUTOMOTIVE

    CTF FOAM FOR AUTOMOTIVE CAR INTERIOR ENVIRONMENTAL PROTECTION MATERIAL 1. Sound damping material for car door panels Material:XPE,Flip Flop Foam Density: 8B (125 kg/m & sup3;), 10B (100 kg/m & sup3;), 15B (66 kg/m & sup3;), 20B…

    Closed cell PE foam for surfboard

    Closed cell PE foam For Surf board Cross linked Polyethylene foam is closed cell, meaning it consists of cells so tightly packed together that it gives the appearance of one uniform structure. CTF foam for surfboard /bodyboard material Foam…
    application automotive

    Automotive soft interior material-PP FOAM-IXPP

    IXPP new material for automotive interior There are two kinds of plastics commonly used in automobile interiors: general plastics (PVC, PE, PP) and engineering plastics (PA, ABS, PC). The current PE material has poor weather resistance and…

    XPE foam VS EPE foam

    The difference between XPE/IXPE foam and EPE foam Material: XPE foam (cross-linked polyethylene foam) and EPE foam (expanded polyethylene foam) are both made from polyethylene, but they have different properties due to differences in the manufacturing…

    Compare Polyvinyl hloride, Polyethylene to Cross-linked Polyethylene

    Compare Polyvinyl hloride, Polyethylene to Cross-linked Polyethylene Polyethylene is referred to as PE, which is a polymer of ethylene and is non-toxic. Easy to color, good chemical stability, cold resistance, radiation resistance, good electrical…

    Research and Development Trend of Cross-Linked Polyethylene Foam (XLPE) Industry

    Cross-linked polyethylene foam XLPE foam insulation is a chemical or physical method of Structure changed from linear molecular structure to three-dimensional network structure, from thermoplastic to thermoset material, thus increasing the…

    Flame retardant foam materials and technologies

    Flame retardant PE foam materials and technologies Plastic foam due to its special chemical structure, determines that most plastic products are flammable products, when burning some will also produce a large number of toxic gases and dust,…
    ldpe

    Introduction of Linear Low Density Polyethylene Foam Plastic

    Linear low-density polyethylene (LLDPE) is a new type of polyethylene resin which was produced by Du Pont in Canada in the late 1950s and industrialized in the late 1970s. It is a third-generation polyethylene resin with both high-density polyethylene…
    Copyright © CYG TEFA Co., Ltd. | All Rights Reserved | Designed by Nocti Solution